Avent SCF334/02 User Manual download pdf (Page 10)

Preparing for use

The motor unit, the silicone tube and cap and the adapter do not require cleaning and sanitizing, as

they do not come into contact with breast milk.

Clean and sanitize all other parts of the breast pump before rst use as described in chapter

‘Cleaning and sanitizing’. Also clean these parts after each subsequent use and sanitize them before

each subsequent use.

Assembling the breast pump

Note: Make sure you have cleaned and sanitized the appropriate parts of the breast pump. Wash your

hands thoroughly before you handle the cleaned parts.

Be careful, the cleaned parts may still be hot.

Tip: You may nd it easier to assemble the breast pump while it is wet.

1 Insert the white valve into the pump body from underneath. Push in the valve as far as

possible (Fig. 2).

2 Screwthepumpbodyclockwiseontothebottleuntilitissecurelyxed(Fig.3).

3 Placethesiliconediaphragmintothepumpbodyfromabove.Makesureittssecurely

aroundtherimbypressingdownwithyourngerstoensureaperfectseal(Fig.4).

4 Place the massage cushion into the funnel-shaped section of the pump body. Push in the inner

part of the massage cushion as far as possible and make sure that it is perfectly sealed all

around the rim of the pump body. Press in between the petals to remove any trapped

air (Fig. 5).

Note: Place the cover over the massage cushion to keep the breast pump clean while you prepare for

expressing.

5 Insert the adapter into the wall socket and insert the other end into the motor unit (Fig. 6).

The adapter reference code is indicated on the bottom of the appliance. Only use the indicated

adapter with the appliance.

- For battery operation (SCF332 only), turn the bottom of the motor unit in the direction

indicated by the marks on the bottom (1) and remove it (2). Insert four new 1.5V AA batteries

(or 1.2V, if rechargeable) into the battery housing. Reattach the bottom to the motor

unit (Fig. 7).

Note: A new set of batteries provides up to 3 hours of operation. If you have inserted batteries in the

battery housing of the motor unit and plug in the adapter, the breast pump will run from the main power

supply. The batteries cannot be charged in the unit.

6 Attach the silicone tube and cap onto the diaphragm. Push down the cap until it is securely in

place (Fig. 8).

Using the breast pump

When to express milk

If breastfeeding goes well for you, it is advisable (unless advised otherwise by your healthcare

professional/breastfeeding advisor) to wait until your milk supply and breastfeeding schedule are

established (normally at least 2 to 4 weeks after giving birth).

Exceptions:

- If breastfeeding does not immediately work for you, expressing regularly can help to establish

and maintain your milk supply.

ENGLISH10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 39 40

Comments to this Manuals

No comments

Avent SCF334/02 User Manual Page 10

Comments to this Manuals

Related products and manuals for Breast pumps Avent SCF334/02