Avent SCF355/00 User Manual download pdf (Page 8)

4 Select the desired setting based on the milk volume. See

the express warming reference table at the end of this

chapter to check how long the milk needs to be warmed

in the selected setting (Fig. 6).

Note: The speed of warming milk depends on the amount of

the milk warmed and on its initial temperature, i.e. room

temperature (20°C) or fridge temperature (5°C).

5 The orange light goes on when you select a setting. This

indicates that the bottle warmer is on (Fig. 7).

Note: Whilst warming the milk circulates and heats evenly.

6 Check the express warming reference table for the time

required to warm the milk. Remove the bottle from the

bottle warmer after the time indicated in the express

warming reference table has passed (Fig. 8).

Tip: When you find the milk is not warm enough, you can

place the bottle back into the appliance for a maximum of

30 seconds of extra warming. This will create a slightly

warmer result but without overheating.

Caution: If you leave the bottle in the bottle warmer longer

than the time indicated in the settings table, the milk may

become overheated.

Note: If you overheat breast milk, valuable nutrients and

vitamins may be lost.

7 Always check the temperature before you feed your

baby. Gently shake the bottle or milk storage container

and check the temperature of the milk by sprinkling a

few drops on the inside of your wrist (Fig. 9).

8 Turn the knob back to the ‘o’ position (Fig. 10).

Caution: If you do not turn the knob back to the ‘o’

position, the water keeps warming.

ENGLISH10

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 65 66

No comments

Avent SCF355/00 User Manual Page 8