Avent SCF330/20 User Manual download pdf (Page 7)

Caution

- The breast pump is only intended for repeated use by a single user.

- Never drop or insert any foreign object into any opening.

- Never use any accessories or parts from other manufacturers or that Philips AVENT does

not specically recommend. If you use such accessories or parts, your guarantee becomes

invalid.

- Wash, rinse and sterilise all pump parts before each use.

- Do not use antibacterial or abrasive cleaning agents when you clean breast pump parts.

- Do not continue pumping for more than ve minutes at a time if you do not succeed in

expressing any milk.

- If the pressure generated is uncomfortable or causes pain, break the seal between the breast

and the pump body with your nger and remove the pump from your breast.

Preparing for use

Clean and sterilise all parts of the breast pump before rst use as described in chapter ‘Cleaning

and sterilising’. Clean all parts after each subsequent use and sterilise all parts before each

subsequent use.

Assembling the breast pump

Note: Make sure you have cleaned and sterilised all parts of the breast pump. Wash your hands

thoroughly before you handle the cleaned parts.

Be careful, the cleaned parts may still be hot.

Tip: You may nd it easier to assemble the breast pump while it is wet.

1 Insert the white valve into the pump body from underneath. Push in the valve as far as

possible (Fig. 2).

2 Screw the pump body clockwise onto the bottle or storage cup until it is securely

xed (Fig. 3).

Note: If you use a storage cup, you have to screw the adapter onto the storage cup rst.

3  Place the silicone diaphragm with stem into the pump body from above. Make sure it ts 

securely around the rim by pressing down with your ngers to ensure a perfect seal (Fig. 4).

4 Attach the handle onto the diaphragm with stem by hooking the hole in the handle over the

end of the stem. Push down the handle onto the pump body until it clicks into place (Fig. 5).

5 Place the massage cushion into the funnel-shaped section of the pump body. Push in the

inner part of the massage cushion as far as possible and make sure that it is perfectly sealed

all around the rim of the pump body. Press in between the petals to remove any trapped

air (Fig. 6).

Note: Place the cover over the massage cushion to keep the breast pump clean while you prepare

for expressing.

ENGLISH 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 91 92

No comments

Avent SCF330/20 User Manual Page 7