Avent SCF356/00 User Manual download pdf (Page 12)

Re-using the baby bottle warmer right away for another

bottle

If you want to heat up another bottle right away, let the baby

bottle warmer cool down for a few minutes. To speed up this

process, ll the baby bottle warmer with fresh cold water.

When you switch on the baby bottle warmer, the progress

indicator starts ashing from bottom to top to indicate that

the appliance is heating up again.

Note: If the progress indicator is on but does not flash, the

baby bottle warmer is still too warm to heat up another

bottle. Please switch o the baby bottle warmer, let it cool

down for a few minutes and make sure you fill it with fresh

cold water.

Using the baby bottle warmer to warm baby food

1 Put the mains plug in the wall socket (Fig. 3).

2 Place a baby food container or jar centrally in the baby

bottle warmer (Fig. 15).

Note: You can leave o the lid of the food container or jar,

so you can stir the baby food during heating.

3 Fill the baby bottle warmer with the same amount of

drinking water as the amount of baby food you want to

warm up (for example, to warm up 125ml/4oz of baby

food, you need to use 125ml/4oz of drinking water). If

you want to warm up a large amount of baby food, the

maximum water level is approximately 1cm/0.4 inches

under the rim of the baby bottle warmer (which

corresponds to adding 160ml/4.5oz of drinking water).

An accurate water level ensures correct warming

performance. (Fig. 16)

4 Select the baby food warming setting (Fig. 17).

5 Press the on/o button to switch on the appliance. The

light in the progress indicator shows that the baby bottle

warmer is on (Fig. 18).

ENGLISH14

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 121 122

No comments

Avent SCF356/00 User Manual Page 12