Avent SCF356/00 User Manual download pdf (Page 12)

Note: If the progress indicator is on but does not flash, the

baby bottle warmer is still too warm to heat up another

bottle. Please switch o the baby bottle warmer, let it cool

down for a few minutes and make sure you fill it with fresh

cold water.

Using the baby bottle warmer to warm baby food

1 Put the mains plug in the wall socket (Fig. 3).

2 Place a baby food container or jar centrally in the baby

bottle warmer (Fig. 15).

Note: You can leave o the lid of the food container or jar,

so you can stir the baby food during heating.

3 Fill the baby bottle warmer with the same amount of

drinking water as the amount of baby food you want to

warm up (for example, to warm up 125ml/4oz of baby

food, you need to use 125ml/4oz of drinking water). If

you want to warm up a large amount of baby food, the

maximum water level is approximately 1cm/0.4 inches

under the rim of the baby bottle warmer (which

corresponds to adding 160ml/4.5oz of drinking water).

An accurate water level ensures correct warming

performance. (Fig. 16)

4 Select the baby food warming setting (Fig. 17).

5 Press the on/o button to switch on the appliance. The

light in the progress indicator shows that the baby bottle

warmer is on (Fig. 18).

Note: The baby bottle warmer starts warming up right after

you press the button. Due to the large variety of baby food

consistencies, it is not possible for the appliance to detect

exactly how long the baby food should be warmed.

6 The progress indicator starts to ll gradually with white

light to show the progress of the warming process. During

the warming process, do not take the jar or container out

of the baby bottle warmer but stir the baby food while

the jar or container is still in the baby bottle

warmer (Fig. 19).

ENGLISH14

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 133 134

No comments

Avent SCF356/00 User Manual Page 12